The Snagsafe lead clip is a lead/feeder clip for use with a running leger set-up. It features a large bore hole to allow the line to run freely, offering minimum resistance to a taking fish.
The main design feature is the actual clip itself, which can spring open under pressure to release the lead/feeder, should it become snagged. A length of silicon tube, supplied on the clip is used to hold the lead in place and helps to minimise tangles.
The standard clip requires a straight pull of approximately 4lbs pressure to release.
The large clip requires a straight pull of approximately 8lbs pressure to release.
The most versatile safety running leger system available to the specialist angler.
The weight is attached to the large bore run ring via a plastic split ring, which will open or break under pressure to release the lead/feeder should it became snagged. Simply replace with another split ring without breaking the rig down. The pack contains 3 run rings, and 20 split rings in 2 sizes with release pressures of approx 3 to 4lb and 8 to 9lbs to suit a multitude of angling situations and line breaking strains. The length of silicone tube is used to hold the lead/feeder in place.
Choose a split ring with the most appropriate release pressure:
Small green 3lb – 4lb.
Large green 8lb-9lb.
Soft imitation pupa/larvae for use with hair rigged baits, in clear water conditions. Camouflages the hook and eliminates glint from the sun, which may spook wary fish. Two colour options per pack for use over silt or gravel. Buoyancy helps to counterbalance the weight of the hook.
Suitable for side weighted maggot, open end and wire mesh feeders.
Enables hook length to be fished close to the feeder, creating a bolt-rig effect, but allows it to pull free, leaving the angler in direct contact with the fish.
Tension control nut allows for fine adjustments to suit line diameter. Reduces tangles when casting.
Designed primarily for the river angler, the Specialist Rod Rests has an added benefit of an illuminated head for any night fishing situation. There are 4 powerful re-chargeable luminous glowsticks that illuminate the clear head to assist rod placement at night. Glow sticks can be replaced if desired with 2 high power isotopes using the silicone tube provided.
The unique design of the Specialist Rod Rests allows a sideways strike and prevents the rod from being dragged in.
Easily locate items of tackle at night. Suitable for bank sticks, rod rests, landing nets etc. Fit and remove in seconds.
Complete with hi-power recharchable luminous glow stick that glows for up to 8 hours. Can be replaced with an isotope. Fits diameters 8mm to 20mm.
Pop-up-Sweetcorn is a buoyant rubber imitation grain of corn. It is soft enough to be used on the hook if desired, but is best when used on a hair rig along with real grains of corn, of a corresponding colour.
A buoyant imitation split grain of hemp that can be used directly on a hook or hair rig. contains a soft white rubber kernel that makes hooking easy and ensures the hook stays firmly in place. Ideal for counter balancing hooks over loose fed hemp.
Suitable for use with all types of boilie. Two lengths, longer version ideal for double baits and snowman rigs. Both sizes can be cut to suit any size of bait. No fiddly hair stops, re-bait in seconds. Simply tie to hair and push in to bait.
Made from soft neutrally buoyant plastic that is virtually invisible in water, the Bait Cages offer the angler a new concept in bait presentation, making it possible to present baits in a way like never before. Baits such as caster and hemp can be squashed once inside the cage to release juices and oils, sweetcorn pulp can be squeezed out of its skin into the cage to produce a juicy sweetcorn ball.
5 per pack.
Boilie crumb, mini pellets, chopped worm, paste can all be used individually or mixed in the cage to give an enticing hook bait, that crayfish and small nuisance fish cannot destroy. Eight or nine large maggots will produce a writhing ball, that fish find irresistible as they get stuck trying to escape through the mesh.
Thread one of the discs onto the hair rig first before attaching the bait cage open end facing up the hair. Secure with a hair stop beneath the solid base. Once filled, slide the disc down to seal the opening.
The hair version comes in two lengths to suit 14mm and 18mm boilies, both have a 10mm long hair that is relatively stiff to make bait rejection difficult, but can be also be stretched slightly to produce a more supple hair if required.